Army AGSU Uniform: Everything You Need to Know About Setup

The Army Green Service Uniform has been turning heads since its reintroduction. Inspired by the iconic "Pinks and Greens" worn by soldiers during World War II, the Army AGSU uniform brings a classic look back to the modern force—and with it, a detailed set of setup requirements every soldier must follow.

Whether you're receiving your first AGSU Army uniform or refreshing your knowledge before an inspection, getting the setup right matters. A poorly configured uniform reflects on your professionalism and, more practically, can result in corrective action. The stakes are real.

This Army AGSU uniform setup guide covers everything from the basics of what the uniform includes, to how insignia are worn, to the specific requirements for soldiers. By the end, you'll have a clear, practical understanding of how to set up your Army green service uniform (AGSU) correctly the first time.

For the record, I know that it is called the AGSU, not the Army AGSU uniform, but given there are a lot of uninformed people using the search term Army AGSU uniform, we thought we could educate them by using that term to have them read this post.

What Is the Army AGSU Uniform?

The Army green service uniform (AGSU) is the U.S. Army's service uniform, officially replacing the Army Service Uniform (ASU) as the primary service uniform for soldiers. The Army began phasing in the AGSU around 2020, with full transition timelines established by the Army's uniform policy under Army Regulation (AR) 670-1.

The AGSU Army uniform draws its design from the uniforms worn between the 1940s and 1960s. The distinctive green shade, known officially as "Army green," gives the uniform its name and its classic, professional appearance.

The Army AGSU uniform consists of several key components:

• The green coat – A tailored, button-front coat in Army green

• The green trousers or skirt – Matching bottoms in the same Army green shade

• The service cap or other authorized headgear

• The long-sleeve shirt – Worn under the coat or as a standalone shirt in certain configurations

• The four-in-hand necktie or neck tab – Depending on gender

• Oxford shoes or pumps – Gender-specific footwear requirements

Each component has specific wear requirements. Getting them right starts with understanding AR 670-1, the Army's governing regulation for wear and appearance of Army uniforms and insignia.

Why the AGSU Replaced the ASU

The Army Service Uniform (ASU)—the dark blue uniform most people associate with formal Army occasions—had been the Army's service uniform since 2010. The decision to reintroduce the AGSU Army uniform was driven by a desire to restore a distinctive Army identity and to reconnect the modern force with its heritage.

The Army green service uniform (AGSU) also offers practical advantages. The green color is widely considered more versatile and less formal in appearance than the blue ASU, making it appropriate across a wider range of official settings. For soldiers, this means one uniform can cover more occasions—reducing cost and wardrobe complexity over time.

Army AGSU Uniform Setup Guide: Male Requirements

For male soldiers, the Army AGSU uniform setup guide follows specific guidelines outlined in AR 670-1. Here's a breakdown of how to configure each component correctly.

How should male soldiers wear the AGSU coat?

The AGSU coat for male soldiers is worn buttoned and fitted through the torso. It should not pull, pucker, or bunch at the shoulders, chest, or waist. Key setup points include:

• All buttons fastened when worn outdoors or in formation

• Sleeves ending approximately 1 inch above the top of the wrist bone

• No visible shirt collar above the coat collar

Tailoring is strongly encouraged. A well-fitted Army AGSU uniform coat communicates attention to detail and pride in appearance.

What trousers are worn with the Army AGSU uniform for males?

Male soldiers wear Army green trousers that match the coat. Trousers should break slightly at the top of the shoe. Blousing or pegging is not authorized, unless the soldier is a part of a specific unit or MOS. The crease should be sharp, centered on the front and back of each leg.

How is the shirt worn under the AGSU coat?

When the coat is worn, only the collar of the Heritage Tan shirt should be visible. The tie is worn snugly under the shirt collar, with the knot centered and the tip of the tie reaching the top of the belt buckle.

The Heritage Tan shirt can also be worn without the coat in certain approved settings. In that configuration, the tie is still required, and the shirt sleeves are rolled down and buttoned.

What belt and buckle are authorized for the Army AGSU uniform?

The Heritage Walnut cotton web belt is worn with the open-face brass buckle, threaded so the brass tip passes through the buckle to the wearer's left for men and to the right for women. The tip must not extend more than one inch past the first pant loop.

Insignia Placement on the Army AGSU Uniform

Insignia placement is one of the most detail-intensive aspects of setting up the Army AGSU uniform. AR 670-1 specifies exact measurements and locations for every device. The following are the core placement rules.

Where does rank insignia go on the AGSU?

• Officers: Grade insignia is worn centered on the shoulder loop of the coat, midway between the outer shoulder seam and the button.

• Enlisted soldiers: Grade insignia (chevrons) is worn on both sleeves of the coat, centered on the outer half of the sleeve, approximately halfway between the shoulder seam and the elbow.

Where are the U.S. insignia and branch insignia placed?

• U.S. insignia: Worn on the right collar, centered on the collar point

• Branch insignia: Worn on the left collar, centered on the collar point, parallel to the front edge of the collar

Both devices are worn approximately 5/8 inch up from the bottom edge and 5/8 inch from the front edge of the collar.

How are qualification badges and awards worn on the Army AGSU uniform?

Qualification badges (such as the Expert Infantryman Badge or the Parachutist Badge) are worn above the left breast pocket. Awards and decorations follow a specific order of precedence and are arranged in rows of three, starting from the top row. Unit awards are worn on the right breast.

Exact placement measurements are provided in AR 670-1 and the Army's Uniform Quick Reference Guide, both of which should be consulted before every wear.

Common Army AGSU Uniform Setup Mistakes to Avoid

Even experienced soldiers make setup errors when transitioning to the Army AGSU uniform. These are the most frequently cited issues:

• Incorrect insignia placement – Off-center or improperly measured devices are a common inspection finding

• Poor fit – An untailored coat that hangs loosely undermines the entire appearance of the Army green service uniform (AGSU)

• Wrong shirt configuration – Wearing a short-sleeve shirt under the AGSU coat is not authorized

• Unsecured ribbons – Award ribbons must be secured with a ribbon rack or individual fasteners to prevent movement

Getting Your Army AGSU Uniform Right

Setup is never just about following rules—it's about representing yourself and the Army with pride. The Army AGSU uniform is a direct link to one of the most storied chapters in American military history. Wearing it correctly honors that legacy.

Start with AR 670-1. Measure twice. Tailor when possible. And do a thorough inspection before every wear. If you're working through an Army AGSU uniform setup guide for the first time, take it section by section—coat, trousers, shirt, brass, insignia, and footwear.

The details are demanding, but they're manageable. And the result—a sharp, properly configured Army green service uniform (AGSU)—is worth every minute.

Frequently Asked Questions About the Army AGSU Uniform

Below are some AGSU FAQs.

Who is required to wear the Army AGSU uniform?

All active-duty soldiers, as well as Reserve and National Guard soldiers in applicable duty statuses, are required to obtain and wear the Army AGSU uniform in accordance with Army policy and command guidance.

Where can I find the official setup guide for the Army AGSU uniform?

The primary reference is Army Regulation 670-1, Wear and Appearance of Army Uniforms and Insignia. The Army also publishes an official Uniform Quick Reference Guide, available through Army resources, which provides visual references for insignia placement and uniform configuration.

Hopefully this Army AGSU uniform setup guide male was helpful. It also included a little information for female soldiers. Remember, when in doubt, consult the regs or your unit leaders.